Author: Ashkan Part

Bending measurement mould: During the firing of ceramic bodies at high temperature, a molten phase is created in the body that connects other particles and the penetration of this molten phase into the pores causes shrinkage. On the other hand,...

Model In the ceramic industry, “Model” is called a design of a piece, such as the London model teapot, and in the foundry industry, it is called a piece that is used to prepare sand molds into which the melt...

If you work with a jigger machine and use plastic clay molding, these tips will definitely be interesting to you: 1) These factors cause deformation: Improper plasticity of the body (too little or too much) When the clay is placed...